AEG · Washing Machine · Water Supply Issue

AEG Washing Machine Error E10

AEG washing machine error E10 usually indicates a water-supply fault. ECL records this code as “Water Fill Problem”. Common causes on this page include Water tap closed or partly open and Kinked inlet hose or blocked inlet filter, but the exact cause can vary by model and appliance generation. Stop using the appliance and follow the safety guidance below; do not dismantle it or test live components, and arrange professional help before using it again.

Quick answer: Water Fill Problem

In simple terms

AEG washing machine code E10 usually means Water Fill Problem. Follow these four steps.

1Understand the code

See what the code usually means and why it may have appeared.

2Try safe checks

Try only the simple checks listed on this page. Do not take the appliance apart.

3Check if it is safe to use

This page says to stop using it. Follow the safety advice below before doing anything else.

4Choose the next step

Use the next-step box to see whether to keep checking, find a part by model or get repair help.

What AEG E10 means

E10 means the AEG washing machine has not filled to the expected level within the permitted time. It can be caused by a simple supply restriction or an internal valve, sensor, or wiring issue.

Common causes

  • Water tap closed or partly open
  • Kinked inlet hose or blocked inlet filter
  • Low supply pressure
  • Inlet valve or water-level sensing fault

Safe checks you can make

  1. Open the water tap fully
  2. Check the inlet hose for kinks
  3. Clean the accessible inlet filter after isolating the supply
  4. Confirm normal pressure at a nearby cold tap

Is it safe to keep using the appliance?

Isolate the water if filling continues when the machine is off.

Repair help

Stop using the appliance for now

Follow the stop-use advice above. Do not take the appliance apart or keep resetting it to see if the fault clears.

Find an ECL Verified repairer

No obligation. Your contact details are only shared after you submit the repair request, and only with a suitable ECL Verified repairer where coverage is available.

When to stop and call an engineer

If standard user maintenance does not clear the error, or if you suspect an electrical component failure.

Your model may be different

Error-code meanings can vary by model, market and appliance generation. Confirm AEG E10 against the instruction manual or support information for the exact model number before replacing parts or treating this page as a model-specific diagnosis.

Where this information comes from

Publisher: Error Code Lookup Editorial Team. This page is independent information written in our own words and reviewed with safety boundaries in mind.

Manufacturer information: AEG UK Support. Use the exact model number to verify model-specific wording and instructions.

Last reviewed: 2026-07-31

How Error Code Lookup researches and verifies pages · Report a correction or provide model-specific evidence

Frequently asked questions

What does E10 mean on a AEG washing machine?

E10 means the AEG washing machine has not filled to the expected level within the permitted time. It can be caused by a simple supply restriction or an internal valve, sensor, or wiring issue.

What usually causes AEG error E10?

Common causes include Water tap closed or partly open; Kinked inlet hose or blocked inlet filter; Low supply pressure; Inlet valve or water-level sensing fault.

Can I safely fix E10 myself?

Some basic external checks may be safe to try first. Stop if there are leaks, burning smells, overheating, electrical issues, unusual noises or repeated failures.

When should I call a professional for E10?

If standard user maintenance does not clear the error, or if you suspect an electrical component failure.

Related AEG washing machine codes

Browse all AEG washing machine error codes · Browse all washing machine error codes · Troubleshooting guides